This new level of performance is the direct result of important Spendor innovations. Improving on the D7 was always going to be a hard task as it is one of our favourite speakers of all time! Information is limited on the new D9 but as soon as we have any it will be posted on here.
For any further info, please call the shop on 0208 930 9933
The new Spendor D9 is an elegant, modern, full-size, 3-way, 4-driver, floor-standing loudspeaker. The D9 delivers music with exceptional resolution and a vibrant realism that conventional loudspeakers cannot match. It delivers low frequencies with breath-taking power, scale and authority. It is easy to place in real-world listening rooms, very efficient, and compatible with all good amplifiers. With a tall slim enclosure and smart modern finishes the Spendor D9 is entirely at home in any living environment. The D9 incorporates all the engineering innovation developed for our 3-way Spendor D7 loudspeaker, but the new D9 is far more than just a big D7 . . .
SPENDOR LPZ (LINEAR PRESSURE ZONE) TWEETER The goal of every tweeter designer is to achieve linear acoustic output over a wide frequency range. In practice this is extremely difficult. Spendor’s approach to this challenge is radical, and it works. The Spendor LPZ tweeter is built around a stainless steel front plate which forms a damped acoustic chamber directly in front of a lightweight woven polyamide diaphragm. The front plate incorporates a phase correcting micro foil to equalise sound wave path lengths across the diaphragm surface. Simultaneously it generates a symmetrical pressure environment on both faces of the diaphragm so the tweeter always operates in a balanced linear mode. The front plate also provides excellent mechanical protection for the delicate tweeter dome and a smart modern appearance.
NEW SPENDOR 18CM DRIVE UNITS DEVELOPED FOR D9 The D9 mid-bass drive unit has an advanced EP77 polymer cone. Housed in an isolated enclosure at the top of the cabinet, it handles only mid-range frequencies which eliminates mid-low frequency intermodulation. It delivers music with superb clarity and vanishingly low colouration. The two D9 low frequency drivers have ultra-rigid, two part bonded, lightweight Kevlar composite cone assemblies. The bass drivers are in a large dedicated low-frequency acoustic enclosure. This allows the D9 to deliver accurate powerful bass without distortion or compression. All three drivers feature cast magnesium alloy chassis, high efficiency motor systems, optimised electro-dynamic damping, and excellent thermal dissipation for wide dynamic range. New polymer surrounds with very stable molecular composition reduce driver break-in time significantly.
FIFTH GENERATION SPENDOR LINEAR FLOW PORT When extended low frequency sound reproduction is the goal there is simply no substitute for volume. In the D9 low frequencies are handled by two specially designed bass drivers in a substantial volume enclosure. For optimum low frequency response and power handling the enclosure is ported, but not like any conventional loudspeaker. The D9 incorporates our innovative Fifth Generation Spendor Linear Flow Port Technology. Inspired by Formula 1 diffuser technology it offers significant advantages over any conventional port or transmission line loading. An aerodynamically profiled central baffle, like an aircraft wing, creates a tapered twin-venturi port. Air at the port extremities is smoothly decelerated and there is a further reduction in air velocity in the large tapered area at the cabinet base. The result is evenly balanced acoustic pressure and linear air-flow along the whole length of the port. Rapidly decreasing air velocity at the port extremities creates an air-curtain effect to eliminate port noise and spurious mid-band radiation. A carefully optimised combination of bass driver electrical and mechanical parameters, enclosure volume, air flow and wide-band (very low Q & very low phase shift) alignment allows the D9 to deliver deep, fast, articulate bass in a way no conventional loudspeaker can challenge.
UNCONSTRAINED AIRFLOW Conventional loudspeakers incorporate foam or fibre to provide low frequency acoustic damping. The damping material stores energy. As stored energy is released it is no longer intime with the original music and it creates an unnaturally, heavy, slow sound. Inside the D9 there is no low frequency damping, the sound path, from the bass drivers to the listening room, is totally unrestricted. Consequently, the Spendor D9 is entirely free from damping material energy storage effects. The advantage is clearly audible, music sounds naturally fast, agile and coherent.
SPENDOR DYNAMIC DAMPING AND ASYMMETRICAL APERTURE BRACING Timing is a fundamental element of all music. In conventional loudspeakers rigid high density cabinet panels are mass-damped to reduce cabinet-talk. Spurious energy is stored and released slowly. This introduces unacceptable and unnatural blurring and slowing of the sound. Spendor’s solution is Asymmetrical Aperture Bracing to disperse internal waves and create a very rigid non-resonant enclosure, while Spendor Dynamic Damping with small low mass constrained polymer dampers at key energy interface points instantly convert any spurious energy in the cabinet structure into inaudible heat. The result is a silent rigid cabinet and a naturally fast engaging sound.
STABILISER INSERTS The base of each cabinet has four levelling feet attached via forged steel inserts to hold the cabinet rock-steady. The elimination of micro-vibration allows fine musical detail to be reproduced with delicate precision.
CROSSOVER NETWORK A meticulously refined crossover network with precision wound inductors and high-linearity plastic film capacitors integrates the drivers seamlessly in a minimum phase alignment.
HIGH EFFICIENCY 90dB efficiency and an easy to drive 8ohm load ensure complete compatibility with all good amplifiers and cables. With substantial power handling the D9’s can play very loud without compression. At low replay levels the sound is always clear and balanced.
ELEGANT MODERN DESIGN The Spendor D9 looks as good as it sounds. Our special finishes perfectly complement today’s on-trend interiors. Spendor Dark, a diamond polished gloss lacquer over a dark natural veneer, for an alluring modern look. Satin white, a silky pure white lacquer, for a distinctive contemporary look. Dark ebony for a deep luxurious look, and natural rosewood for a timeless exotic look. Standard finishes are light oak, dark walnut, cherry and black ash.
TECHNICAL SPECIFICATION D9 loudspeaker Description 3-way floor standing loudspeaker Enclosure type Rigid, asymmetric braced, vented cabinet with dynamic damping Vent type Fifth generation Spendor linear flow, tapered twin-venturi port Input connection Single pair recessed precision binding posts Typical in-room response 27Hz - 25kHz Power handling 250 watts unclipped programme Sensitivity 90dB for 1 watt at 1 metre Nominal impedance 8 ohms HF driver Spendor 22mm LPZ polyamide dome Mid driver Spendor 18cm EP77 polymer cone Bass driver 2 x Spendor 18cm Kevlar© composite cone Crossover frequencies 500Hz, 4.2kHz Net Weight 35kg Height 1,125mm (excluding feet) Width Cabinet 210mm, plinth 222mm Depth Cabinet 385mm, plinth 409mm Finishes Special: Spendor dark (hi-gloss), satin white, dark ebony, rosewood Standard: cherry, light oak, black ash, dark walnut Plinth satin black Accessories Height adjustable spike feet, grille, non-slip polymer feet.
Reserve and collect only.
This item is not available by Mail Order and can only be purchased in store.
Please use the Reserve and Collect feature by adding the item to your basket and completing the checkout details. A member of Harrow Audio will contact you to confirm when your item is ready to collect.