Lehmann Linear USB

Designed for computer use, the Linear USB offers the finest conversion from digital sources into fluid enjoyable music.
Availability: In stock
Manufacturer: Lehmann

The Linear USB built-in DAC is meticulously built with an integrated Burr Brown DAC and separate voltage regulators of highest quality. The USB connector is only used to transport the signal and not as a power supply.

The Linear USB is a high end headphone amplifier that will satisfy even the highest requirements for quality headphone music reproduction.

The selectable gain (0 dB, 10 dB, 20 dB) of the Linear USB effectively optimizes the output level of the zero global feedback Class A output stage. Practically all high quality dynamic headphones available will show their best possible performance. Carefully selected top notch components and a highly sophisticated circuit design guarantee top performance listening pleasure.

For stereo setups consiting of your computer and an additional analog source like a CD player or a turntable with a phono stage the Linear USB is the simplest and most effective active preamp one can think of. You don't even have to care about input switching because the unit detects the USB audio signal automatically!

The faceplate and the massive milled aluminium knob for the smooth running 27 mm ALPS high grade volume control are available in anodized black or silver.

Key Features:

  • Class-A output stage with zero global feedback
  • Excellent sonic performance
  • USB-input for computers  from USB 1.0 and upwards, works with sample rates up to 48kHz
  • Additional analogue input with RCA and 3,5mm jack connectors with loop through
  • Automatic input selection with USB prioritisation
  • Maximum gain selectable up to  20dB for the use with practically all dynamic headphones
  • Double sided audio board layout for optimal parts placement and trace routing
  • Burr Brown audio grade components
  • Only Low-ESR electrolytic capacitors
  • Gold plated RCA audio connectors
  • Highly sophisticated, clean power supply. USB is used for data transfer only.
  • Nonmagnetic case (aluminium)

Technical Data:

Input Impedance: 47kΩ 
Maximum Gain: 0dB, 10dB, 18db, 20dB (Switchable) 
Frequency Response: 10Hz (-0.3dB) to 35kHz (-1dB) 
Signal-to-Noise: >95dB at 0dB Gain
THD: <0.001% at 6mW/300Ω
Channel Separation: >70dB / 10kHz
Output Power:

400 mW/60Ω
200 mW/300Ω
Output Impedance:

Line-Out: 60Ω
Phones-Out: 5Ω 
Power Consumption: 10W
Dimensions: 280 x 110 x 44m³ (Case Only)
Connectors (Audio):

Neutrik Phone Jacks (6.35mm)
1 x Parallel to Line-Out
1 x Line-Out Muting
Gold-Plated Connectors With Teflon Isolation
Dimensions:  110 x 280 x 50mm
Weight: 1.5Kg
Sampling Rate Digital:  Up to 48kHz
Resolution:  16 Bit 
Max. Voltage:  1 V eff. 
Related products